Advertisement
S6
Assemble CTRL BD
PICTURE 1
S7
Assemble the RC,
stand and base
PICTURE 1
NOTE: Circuit boards >10 cm² has been highlighted with the yellow rectangle as above image
shows. Please detach the Circuit boards and follow local regulations for disposal.
Assemble the FFC CTRL to the CTRL BD and assemble the CTRL BD to the RC as picture 1.
Stick a piece of adhesive tape to fasten the FFC CTRL on the RC as picture 2.
Insert the FFC CTRL to the IF BD and assemble the RC to the MF as picture 1.
Lock 1 screw to the RC, and lock 4 screws to assemble the Stand and Base to Monitor as
picture 2.
PICTURE 2
PICTURE 2
12
ACER XB253Q
Advertisement
