Siemens BI710E1B1 User Manual And Installation Instructions page 5

If no intermediate floor is possible above the appliance
or above the oven, install tilt protection for the appli-
ance. Suitable tilt protection can be obtained from cus-
tomer service, on our website or in the online shop.
Installing the appliance
Push the appliance all the way into the fitted unit.
1.
Centre the appliance.
2.
Remove the adhesive strip from the appliance front.
3.
Open the appliance.
4.
Screw the appliance to the fitted unit.
5.
Fit the two plastic covers on the left and right of the
6.
profile.
Adjusting the appliance front
Adjust the appliance front upwards or downwards if ne-
cessary.
Open the appliance.
1.
Undo the screws on the side of the panel.
2.
Align the appliance front upwards or downwards.
3.
Alignments of maximum -3 to +3 mm are possible.
Tighten the screws.
4.
Installation instructions en
5