LG RV1329AD1S Owner's Manual page 39

1.
Pressing the Start button cycles to the next test function.
Number of times
the Start
button is pressed
None
Check the version and code of
machine.
1 time
■ ELECTRIC TYPE : P3 OE
■ GAS TYPE : P3 Og
2 time PDA CHECK
3 time Motor runs.
■ ELECTRIC TYPE: Heater runs.
4 time
■ GAS TYPE: GAS valve runs.
■ ELECTRIC TYPE: Heater runs.
5 time
■ GAS TYPE: GAS valve runs.
LED & KEY CHECK
Press High Temp. button.
6 time Press Med Temp. button.
Press Low Temp. button.
Press No Heat button
7 time Test ends.
Door switch
During check, if the
(Motor & Heater Off, Buzzer beeps
door is open.
seven times)
During check, if the Test goes back at step 2.
door is closed (Motor on & Heater Off )
NOTE
During LqC1 test, if no buttons are pressed for 4 minutes, machine will be turned off automatically.
Do not use .
Checking point
Motor + Heater 1 (2700W)
Motor + Valve
Motor + Heater 1 +Heater 2 (5400W)
Motor+Valve
PROGRAMMING MODE
display
LqC 1
Version and code of machine (All LED on)
Display P3:OE or P3:Og and gU:XX alternately. XX is the
version number.
Ir--
Measured moisture value (70~239)
Current temperature (5~70)
(Displays the temperature inside the drum in ° Celsius.)
Current temperature (5~70)
(Displays the temperature inside the drum in ° Celsius.)
Version and code of machine
LqC1
dE
(The door is open. Please close the door completely)
Measured moisture value (70~239)
39