Understanding The Leds - Intermec PB2 User Manual

Understanding the LEDs

PB2 Mobile Printer User's Guide
PB2 LED State Descriptions
LED State
Communications Flashing Green Power is on. PB2 is in RS-232 mode.
Steady Green
Flashing Blue
Steady Blue
Battery Steady Red
Off
Steady Amber
Data and Status Off
Steady Green
Flashing Red
Steady Red
Communications LED
Battery LED
Data and
Status LED
Description
PB2 is communicating with host in
RS-232 mode.
Power is on. PB2 is in Bluetooth or
802.11 mode.
PB2 is communicating via Bluetooth or
802.11 radio.
Low battery charge.
Battery fully charged (when printer is
connected to AC power).
Battery is charging.
Card was read successfully, or card
cannot be read (for optional magnetic
stripe reader).
Card reader is ready to accept data (for
optional magnetic stripe reader).
Printhead is too hot. Printing pauses
until printhead reaches normal
operating temperature.
One of three conditions:
•
Printer is out of paper.
•
The paper door is open.
•
Card reader error (for optional
magnetic stripe reader).
3