Helvitica condensed 9 pt italic
C o d e
3 9
CAUTION
Do not scrape the rubber drive roller. Scraping will gouge the roller and void
any applicable warranty. Gouged rollers must be replaced to maintain high
CAUTION
quality label printing.
CONSEIL
Ne grattez pas le rouleau caoutchouté. Gratter le rouleau gougera le
caoutchouc et annulera toute garantie applicable. Vous devez remplacer les
rouleaux gougés pour maintenir une haute qualité d'imprimante d'étiquettes.
To clean the drive roller
1. Remove the tear-off plate from the front of the printer.
2. Rotate the printhead lift lever clockwise to the UP position.
3. Wipe any accumulated debris off the roller using a clean cloth or cotton
swabs and alcohol. Rotate the roller to clean all areas.
4. Wipe any debris from the tear-off plate before reinstalling it.
Cleaning the Media Path
During normal operation of the 4100 printer, media debris may accumulate
around the printer mechanism and along the media path. This debris should
be cleaned away regularly using a soft bristle brush or vacuum cleaner.
Remove all traces of dust, paper, and adhesive. Clean the flat services of the
media path with a lint-free cloth and isopropyl alcohol.
Cleaning the Printer Case
The 4100 printer case may be cleaned with a general purpose cleaner. Do not
use abrasive cleansers or solvents. Be sure to clean the transparent panel on the
right side of the printer so that the media supply inside is visible when the
cover is closed.
1 8
p t
Routine Maintenance
4
4-7