Required Tools And Materials; Installing The Terminal And Connecting Devices - Intermec Trakker Antares 2475 Installation Instructions Manual

Trakker Antares 2475 Vehicle-Mount Terminal Installation Instructions

Required Tools and Materials

You need the tools and materials listed next to install your 2475. These tools and
materials are not supplied with the terminal.
•
•
•
•
•

Installing the Terminal and Connecting Devices

The steps to install your 2475 depend on the mounting location and the accessories you
want to attach to the terminal.
To install the 2475
1. Attach the antenna to the 2475.
2. Install the terminal on a vehicle or on a surface in an office environment.
3. Install and connect the DC power supply or the external power supply (office
4. Attach a scanner.
5. Connect to serial devices.
6. Fully charge the backup battery.
These procedures are described in detail in the next sections.
6
Common hand tools and mounting hardware
Electric drill and drill bits
Wire crimping and stripping tool
Heatshrink tubing
Heat gun
location only).