Advertisement
White Tube Replacement
1. Straighten the gray flexible tube holder segments as best as
possible.
2. Grasp the gray segments of the flexible tube holder with one
hand, and with your other hand pull the long length of the
white tube until the two tube parts are separated. Dispose of
the old white tube.
3. Roll the gray flexible tube segments on a flat surface to
maximize the straightness of the combined segments.
4. Using a pair of scissors, cut one end of the white plastic tube
to a point.
5. Holding the straight gray tube segments with one hand, insert
the white tube into the narrow black nozzle end of the flexible
gray tube segments with your other hand. Push with a
twisting motion with the hand holding the white tube.
6. The gray segments must be straight. When inserting the white
tube, most difficulties will occur as the front edge of the white
tube encounters an unstraightened lip of one of the segments.
7. With a twisting motion, continue to insert the white tube into
the gray segments. The components are positioned properly
when about one inch of white tubing extends beyond the
small black end segment, and at least six inches of the white
tubing extends beyond the large threaded black end segment.
Note: Should one or more of the gray segments become detached,
reattach by pushing the rounded end of the segment into the opening
of the next segment.
6
Advertisement
