KTI Networks KC-10FM/T Installation Manual

Installation Guide
Ethernet Media Converters
KC-10FM/T
KC-10FM/C
KC-10FM/S
DOC. 980825-KC10FM-K Rev.2
P/N: 750-0111-001
General Description
The KC-10FM Ethernet media converter is designed to be
a connection interface between a 10BASE-T Ethernet UTP
cable and 10BASE-FL fiber cable with no increasing on the
hop count in the network. Each features a RJ-45 connector
and a pair of fiber optic connectors.
KC-10FM/T UTP to multimode fiber with ST connectors
KC-10FM/C UTP to multimode fiber with SC connectors
KC-10FM/S UTP to single mode fiber with ST connectors
Specifications
Standard
IEEE 802.3 10BASE-T, 10BASE-FL
10BASE-T RJ-45 Connector
One RJ-45 switch is provided for selecting the type of RJ-
45 connector as follows:
RJ-45 Switch RJ-45 Type
X position MDI-X
II position MDI
RJ-45 Pin MDI-X type MDI type
1 Rx+
2 RX-
3 Tx+
6 Tx-
It allows you to make all UTP connections using common
straight-through UTP.
10BASE-T UTP Cable
Cable type: Category 3, 4 or 5
Maximum cable distance: 100 meters (328 feet)
Fiber Optic Connectors
Two connectors are provided for fiber optic cable connec-
tion. One is labeled "Tx" for transmitting operation. The
other is labeled "Rx" for receiving operation.
Model KC-10FM/T KC-10FM/C
Wavelength 850nm 850nm
Fiber mode Multimode Multimode
Connector ST type SC type
Fiber cable* 1 62.5/125 62.5/125 8/125
Cable length 2000 meters 2000 meters
1
Fiber cable* : Recommended fiber cable
LEDs
Unit LED Power
Port LEDs UTP Link, UTP Rx, Fiber Link, Fiber Rx
(Rx: receiving status)
Environment
Temperature 0
Humidity
Dimension
74mm x 51mm x 20mm
Power
Tx+
+12V / 500mA minimum
Tx-
Rx+
DC plug type:
Rx-
Installation
1. Install the media converter with the DC power adapter
provided. ( +12VDC, 500mA)
2. Connect the power adapter cable to the media con-
verter before connecting the adapter to the AC outlet.
KC-10FM/S
1300nm
3. Do not connect more than two media converters in
Single mode
ST type series.
14K meters
o - 40 o C
10-90% non condensing