Input Selection And Av Connections - Input And Output Sockets For Connected Equipment - Toshiba 43VJ33 Series Owner's Manual

Input selection and AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6
for a clear view of the back connection recommendations.
Most VCRs and decoders send a signal through the Scart
lead to switch the TV to the correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
B
An S e.g. EXT2S, indicates the input is set for an
S-Video signal.
Input selection
Use the Input Selection if the TV does not switch over
automatically.
Press to select EXT1, EXT2, EXT3.
1 B
EXT1 displays equipment connected to Scart 1.
EXT2 displays equipment connected to Scart 2.
EXT3 displays equipment connected to Scart 3 on
the back of the TV or Input 3 on the side/front of
the TV.
To return to TV mode press
2
numbered buttons.
INPUT signal selection
This specifies the type of signal going into Scarts 2 (EXT2)
or 3 (EXT3) on the back of the TV and the sockets on the
front (also EXT3). Please refer to the manufacturers
instructions for the connected equipment.
From the Feature menu select EXT2 input
1
(or EXT3) and with S or R select either AV or
S-VIDEO as the required input.
again or one of the
B
If the colour is missing try the alternative setting.
Feature menu
EXT2 input
EXT3 input
EXT2 output
Picture position
Panel lock
Blue screen
Convergence
EXIT
OUTPUT signal selection for Scart 2
This enables selection of the source to output from
Scart 2. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
Scart 1 and stereo VCR to Scart 2, then select EXT 1 as
the EXT2 output. The signal received through Scart 1 will
output directly through Scart 2.
Select EXT2 output.
1
Feature menu
EXT2 input
EXT3 input
EXT2 output
Picture position
Panel lock
Blue screen
Convergence
EXIT
Use S or R to change the EXT2 output option to:
2
MONITOR = The picture on screen.
TV = The last television programme selection.
EXT 1 = The picture from equipment connected
to Scart 1.
EXT 3 = The picture from equipment connected
to Scart 3 or the side/front input sockets.
14
S-VIDEO
S-VIDEO
MONITOR
: To exit
S-VIDEO
S-VIDEO
MONITOR
: To exit
OFF
ON
OFF
ON