Advertisement
Error Code
U11
Focus error
H01
Tray loading error
H02
Spindle servo error
H03
Traverse servo error
H04
Tracking servo error
H05
Seek error
H06
Power error
H07
Spindle motor drive error
F103
Illegal highlight Position
F498
No communication between Front
Micro Computer and Main Micro
Computer after power on
F499
No response from Main Micro
Computer when key code is sent from
Front Micro Computer to Main Micro
Computer
F4FF
Force initialize failure (time out)
F500
DSC error
F501
DSC not Ready
F502
DSC Time out error
F503
DSC communication Failure
F505
DSC Attention error
F506
Invalid media
F600
Access failure to management
information caused by demodulation
error
F601
Indeterminate sector ID requested
F602
Access failure to LEAD-IN caused by
demodulation error
F603
Access failure to KEYDET caused by
demodulation error
F610
ODC abnormality
F611
6626 QCODE don't read Error
F612
No CRC OK for a specific time
F630
No reply to KEY DET enquiry
F631
CPPM KEY DET is not available till the
FILE terminal
Error Content
30
Additional error explanation
(Spindle servo, DSC SP motor, CLV servo error)
Cannot switch off the power because of the
and system computer communication error
Big possibility of disc specification violation
highlight display
Main Micro Computer hangs up
DSC stops in the occurence of servo error (
focus error, etc)
DSC-system computer communication error
(Communication failure caused by idling of
Similar disposal as F500
Communication error (result error occured
communication command was sent)
Similar disposal as F500
Disc is flipped over, TOC unreadable, incompatible
disc
Operation stopped because navigation data
accessible caused by the demodulation defect
Operation stopped caused by the request to
abnormal ID data
LEAD IN data unreadable
Access failure to CSS data of disc
No permission for command execution
Access failure to seek address in CD series
Access failure to ID data in DVD series
(for internal use only)
(CPPM file system is unreadable caused by
scratches)
Advertisement
