ABB SACE Tmax XT Manual

Flange handle breaker mechanism xt5

Hide thumbs Also See for SACE Tmax XT:

Download this manual

Doc. N.° 1SDH002011A1626 -

SACE Tmax XT

Flange Handle Breaker Mechanism XT5

Flange Handle Meccanismo Interruttore XT5

Kabelbetätigungsmechanismus XT5

Mécanisme de câble opérateur XT5

Mecanismo de operador de cable XT5

电缆操纵器机构 XT5

XT-5

ECN000190766

- Rev. C

1SDA115551R1 Flange Handle Breaker Mechanism Kit XT5

M5x10

Tools

Outils

Werkzeug

Herramienta

Utensile

Ferramentas

Gereedschap

ST 3x10

T25

T10

#3/16

Page 1 Doc. N.° 1SDH002011A1626 - ECN000190766 - Rev. C SACE Tmax XT Flange Handle Breaker Mechanism XT5 Flange Handle Meccanismo Interruttore XT5 Kabelbetätigungsmechanismus XT5 Mécanisme de câble opérateur XT5 Mecanismo de operador de cable XT5 电缆操纵器机构 XT5 Tools Outils Werkzeug Herramienta...
Page 2 NOTE: Follow recommended installation conditions for XT5 breaker as per instruction sheet 1SDH002011A1002. TRIPPED Push to Trip...
Page 3 ST 3x10 Max. 1.0 N-m Max. 9 lb-in...
Page 4 M5x10 5.5 N-m 48.7 in-lb...
Page 5 Accessory wire routing through cable rack Cable rack Use the highlighted area for accessory wire routing out of the breaker...
Page 6 Cable short end (Pick from Cable XT1..XT6 Kit) Pick from Flange Handle Kit Cable long end(Pick from Cable XT1..XT6 Kit) Pick from Breaker Mechanism Kit...
Page 7 Pick from Flange Handle Kit...
Page 8 Ensure gap between Edge Guard and Breaker Handle as shown before inserting the Drive Pin into the hole of Yoke.
Page 9 TRIP TRIP...
Page 10 Ensure gap between edge guard and breaker handle as shown TRIP TRIPPED Push to Trip...