Environmental Concerns - AEG SANTO 70318-5 KG User Manual

7. Install the handle in the opposite side.
Re-screw the handle bracket on the door
(h4). Turn the handle bracket with the
handle and screw them to the door (h5)
and the fitted handle bracket (h6).
8. Install the top door. Install the middle
hinge (H) on the opposite side.
9. Using a 10 mm spanner, unscrew the
hinge pin (E) and install it on the opposite side of the hinge.
10. Install the bottom door.
11. Install the bottom hinge (E) on the opposite side, using the three screws previously
removed .
12. Remove the blanking cover (F) from the ventilation grille (D) by pushing it in the
direction of the arrow and install it on the opposite side.
13. Install the ventilation grille (D), clipping it into place.
14. Make sure that the front board of the door is parallel to the front board of the top.
15. Reposition, level the appliance, wait for at least four hours and then connect it to the
power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.

Environmental concerns

The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact
your local council, your household waste disposal service or the shop where you purchased
the product.
on the product or on its packaging indicates that this product may not be
Environmental concerns
h4 h5
21
h6