Denso 85PBDC Handling Manual

English
Handling Manual for used Lithium-ion Battery pack (12V-3Ah)
When the battery pack is replaced or removed from the vehicle, the used battery pack requires
special treatment in accordance with EU directive 2006/66/EC and/or the laws in your
region/country. Please follow the instructions below.
Also, consult the applicable service manual for the replacement.
1. Prevention of a short circuit ;
In order to prevent a short circuit, cover the + terminals and the connectors of the used battery
pack with insulating tape securely as shown below.
<Before>
connectors
2. Used battery pack Storage
The following provides guidelines to store the used battery pack after removal from the vehicle:
1 Do not stack the battery packs.
Do not place anything on the battery pack.
2 Store the battery pack where it is kept dry and is not exposed to high temperatures,
fire and direct sunlight.
3 Protect the battery pack from mechanical loads and damage (punctured or crushed).
4 Keep the battery pack away from water and rain.
5 Never place directly on the floor.
6 Always store the battery pack in its normally installed orientation, never invert.
7 Store the battery pack in well ventilated areas.
8 Only store battery pack which are sufficiently insulated against short circuiting.
This battery pack contains about 150ml of petroleum class water-insoluble liquid. Store the
battery pack properly according to all applicable laws in your region/country based on the total
amount of petroleum.
+ terminals
Guidelines to store the used battery pack
<After>
Insulating tape
1