Panasonic GT32-R User Manual page 60

Required items for connection
 LAN cable
Either straight cable or crossing cable can be used.
(MDI/MDI-X Automatic crossover function)
Settings for Ethernet connection
Follow the procedure below to communicate with the Ethernet connection.
1. Connect the GT to a PC with an Ethernet cable.
2. Specify the settings such as IP address for the GT.
3. Startup the GTWIN and specify the communication condition.
The factory settings are as follows.
IP Address
Subnetmask
Default Gateway
Port No
Note) Setting items such as IP address for the GT can be specified in the System Menu.
GTWIN setting
IP address: When it is not displayed, set the property of the TCP/IP in the items such as Network of the
control panel. IP address can be input or changed.
Note) The setting procedure varies depending on the OS used. For the details, refer to
the manual/help of the OS.
Port No.: Set to 0 or within the range of 1025 to 32767 in decimal.
For using it in the GTWIN, set it to 0.
2-20
192.168.1.5
255.255.255.0
192.168.1.1
9094
Network type: Ethernet
Title: Input an arbitrary title (Up to 38 one-byte
characters)
Computer:
Check "Acquire IP address automatically".
The default setting is to use the IP address
currently being used in the computer.
Click [OK] to finish the setting.
Note) When sing multiple Ethernet cards,
specify manually.