Removing and installing the battery
Only use batteries approved by Fujitsu for your notebook.
Never use force when fitting or removing a battery.
Make sure that no foreign bodies get into the battery connections.
Never store a battery for long periods in the discharged state. This
can make it impossible to recharge.
The LIFEBOOK E4511 is shown below. The procedure is identical for both device variants.
Removing a battery
► Prepare for removal, see chapter
► Slide the locking device (1) in the direction of the arrow and hold it in place.
► Slide the locking device (2) in the direction of the arrow.
► Grasp the opening (b) and lift the battery out of the battery compartment
in the direction of the arrow (3).
Fujitsu
"Preparing to remove components", Page
1
HOLD
1
a
3
Working with the notebook
3
PULL UP
64.
2
37