Technics SH-DX1200 Service Manual page 6

CHANNEL FADER control (INPUT A).
VR103-1,103-2
CHANNEL FADER control (INPUT B).
VR104-1,104-2
CROSS FADER control.
VR201-1,201-2
CH. B input sensitivity control.
VR301-1,301-2
CH. A high-range level control.
VR302-1,302-2
CH. A low-range level control.
VR401-1,401-2
CH. B high-range level control.
VR402-1,402-2
CH. B low-range level control.
VR501-1,501-2
Master volume level control.
VR601
Mic volume level control.
VR602-1,602-2
AUX/EFFECTOR volume level control.
VR701-1,701-2
Monitor balance control.
VR702-1,702-2
Monitor volume level control.
VR102S-1,102S-2
CHANNEL FADER control (spare).
VR104S-1,104S-2
CROSS FADER control (spare).
- The voltage value and waveforms are the reference voltage of this
unit measured by DC electronic voltmeter (high-impedance) and
oscilloscope on the basis of chassis. / Accordingly, there may
arisesome error in voltage values and waveformsdepending upon
6