Advertisement
on other days of the week, press the DAY button to select the
next day and then press ENTER. Repeat for additional days.
8. When finished programming place the two selector switch to
OUTPUT and the three selector switch to AUTO.
NOTE: If F:UL is displayed while entering programmed times, you
have entered too many set points beyond the 20 allowed for the
week.
TO REVIEW PROGRAMMED TIMES:
1. Place the two position switch to OUTPUT and the three
position switch to PROGRAM.
2. Press the ENTER button to review all ON and OFF
programmed times until you see E:nd.
TO CHANGE PROGRAMMED TIMES:
1. Place the two position switch to OUTPUT and the three
position switch to PROGRAM.
2. Press the ENTER button until the desired time to change is
displayed.
3. Press the HOUR and MIN buttons to change to the desired
time.
4. Press the ENTER button.
TO DELETE A PROGRAMMED TIME:
1. Place the two position switch to OUTPUT and the three
position switch to PROGRAM.
2. Press the ENTER button until the desired time to delete is
displayed.
3. Press the ON/OFF button twice to delete that time. The
display will now show -:--.
TO OVERRIDE PROGRAM:
Program can be overridden at any time by placing the three position
switch to MANUAL. Programmed set points will be maintained but
will not operate the controlled load automatically. To restore
automatic operation, place the three position selector back to the
AUTO position.
2
Advertisement
