Setting The Gain - Clarion APX2120 Owner's Manual

Two-channel high power system
In this application, the APX2120 is used to drive a pair of subwoofers.

Setting the gain

After completing the installation, follow these steps to set the gain control and perform
the final system checks.
1. Turn the gain control all the way counterclockwise.
2. Turn the vehicle's ignition switch on.
3. Turn the source unit on.
4. Set all tone or equalization controls to flat positions and turn loudness off.
5. Play a CD or tape and set the volume control to 75% of full level.
Note:
If the system uses an equalizer, set all frequency controls to the flat
position.
6. Slowly increase the gain control. Stop when you hear a slight audio distortion.
14
AMPSOwnersManual.pmd 14
APX2120/APX4240/APX1300
2005-12-13, 17:02