Fisher & Paykel 82085 Installation Manual

INSTALLATION GUIDE
ACCESSORY DOOR PANELS FOR DISHWASHER
IMPORTANT!
This guide is provided to assist in safely installing this accessory door panel to the dishwasher.
z
For more information, refer to the Installation Guide supplied with your dishwasher.
z
Handles are not supplied with this kit and can be purchased separately through an authorised Fisher & Paykel dealer.
z
The selected handle must be fitted to the panel prior to installation onto the product.
FIX SLIDER BRACKET
(between panel and screw head)
1
ALIGN DOOR PANEL
3
Increase
5
Decrease
ADA DOOR PANEL (82085)
Top screw detail
3mm
Fix the slider bracket
to the panel through
the lower pilot holes
Slide the custom panel up so
that the top of the door panel is
flush with the control panel.
The panel can only slide
upwards and can be lifted off
and reinstalled if required
CHECK DOOR BALANCE
HANG DOOR PANEL
2
SECURE DOOR PANEL
4
Check the door balance by opening
z
and closing the door.
If the door drops when released,
z
increase the tension.
If the door rises when released,
z
decrease the tension.
Close the door of the
dishwasher and align
the screws of the
accessory panel into
the lower keyhole of
the dishwasher door.
Open the door and remove the
four screws and replace with
Ø3.9 x 1 1/2" (38mm) screws to
fix the panel into place.
595703A 12.19