1. Manuals
  2. Brands
  3. Infinity Manuals
  4. Subwoofer
  5. BassLink
  6. User manual

Infinity BassLink T User Manual

Car subwoofers
Hide thumbs Also See for BassLink T:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
™
BassLink
T
instructions
Thank you
for choosing the Infinity BassLink
™
T. BassLink T has been designed
to provide the kind of high-performance low-frequency reproduction that used to require
big, clumsy enclosures, large amplifiers and complicated installation. To ensure maximum
performance, we strongly recommend that installation be entrusted to a qualified professional.
Although these instructions explain how to install the BassLink T in a general sense, they
do not show the specific installation methods for your particular vehicle. If you feel you do
not have the necessary tools or experience, do not attempt the installation yourself; rather,
ask your authorized Infinity car audio dealer about professional installation options.
Remember to keep this manual and your sales receipt in a safe place for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Infinity BassLink T

Summary of Contents for Infinity BassLink T

  • Page 1 Although these instructions explain how to install the BassLink T in a general sense, they do not show the specific installation methods for your particular vehicle. If you feel you do not have the necessary tools or experience, do not attempt the installation yourself;...

  • Page 2: Mounting Location

    “cabin gain, ” plays an important part in shaping the overall in-car response of the BassLink T. BassLink T is designed to work with your vehicle’s Figure 2. BassLink T in an SUV cargo area. other speakers to reproduce frequencies below 100Hz.

  • Page 3: Power Connections

    • Use at least #10 AWG wire for the +BATT connection panel. On the rear of Basslink T are two channels extending from the opening — one (+12 Vdc) and GND (ground) connections. If needed, use at least a #20 AWG wire for the horizontal, and one vertical —...
  • Page 4 Figures 8 and 9 on pages 4 and 5. For more system ideas, see your authorized Infinity car audio dealer. Figure 8. BassLink T audio connections for a head unit with two line-level or subwoofer (RCA) outputs. LINE LEVEL...
  • Page 5 PPLICATIONS CONTINUED Figure 9. BassLink T audio connections for a head unit equipped with two speaker-level outputs. AUTO LINE LEVEL HIGH LEVEL POWER TURN ON INPUT INPUT – – PHASE REMOTE LEVEL +BATT FUSE CONTROL 0° BASS GAIN CROSSOVER BOOST AUTO 180°...

  • Page 6: Installation

    Drill cable outside the vehicle. Connect the RJ11 cable a 9/32" hole in the mounting surface. Feed the between the RJ11 receptacle on the BassLink T Remote Level Control’s potentiometer (with the and the receptacle on the Remote Level Control knob removed) through the hole and use the nut (Figure 12).

  • Page 7: Controls And Functions

    CROSSOVER: Use this control to adjust the to connect the Remote Level Control (see page 6). amount of high-frequency information present in BassLink T’s output. A lower value means more of PEAK LED: This indicator glows red when the the high frequencies are filtered out.

  • Page 8: Troubleshooting

    AUTO TURN-ON is set to ON. control (see Tuning BassLink T on page 7). BassLink T will remain on another 5 to 10 minutes 3. Head-unit output is distorted or blown. See after sensing that audio signals are not present your authorized Infinity car audio dealer.

Table of Contents