Operation; Specifications; Surround Modes; Maintenance And Service - Infinity SAT-750 Owner's Manual

INFP1419SAT-750 OM 8/11/03
O
PERATION

Surround Modes

When using the system in a Dolby* Digital or DTS home theater
system, make sure all SAT-750 speakers are set to "Small" .
When using the SAT-750 in a Dolby Pro Logic* home theater
system, make sure the receiver's center channel mode is set
to "Normal."
Some Dolby Digital-equipped receivers/processors offer different
setup options for each source or surround mode, e.g., CD-stereo,
videotape, Dolby, Pro Logic. In each case, follow your equipment's
instructions to ensure that the subwoofer output is turned on and
that the speakers are set to "Small" in each mode.
M
AINTENANCE AND
The satellite enclosure may be cleaned using a soft cloth to
remove fingerprints or to wipe off dust.
All wiring connections should be inspected and cleaned or
remade periodically.The frequency of maintenance depends on
the metals involved in the connections, atmospheric conditions,
and other factors, but once per year is the minimum.
If a problem occurs, make sure that all connections are properly
made and clean. If a problem exists in one loudspeaker, reverse
the connection wires to the left and right system. If the problem
remains in the same speaker, then the fault is with the loud-
speaker. If the problem appears in the opposite speaker, the
cause is in another component or cable. In the event that
your SAT-750 ever needs service, contact your local Infinity
dealer or Infinity directly at 516-674-4INF (USA only) or
www.infinitysystems.com for a service center near you.
SAT-750
4
10:38 AM Page 6
S
ERVICE
S
PECIFICATIONS
SAT-750
Frequency Range:
Recommended
Amplifier Power Range:
Sensitivity:
(2.83V @ 1 meter)
Nominal Impedance:
Crossover Frequency:
Midrange Driver(s):
High-Frequency Driver:
Dimensions (H x W x D):
Weight:
Infinity continually strives to update and improve existing products, as well as
create new ones.The specifications and construction details in this and
related Infinity publications are therefore subject to change without notice.
120Hz – 20,000Hz (±3dB)
10 – 100 watts
88dB
8Ω
3500Hz, 24dB/octave
3-1/2" MMD,
magnetically shielded
3/4" MMD,
magnetically shielded
6" x 4-1/8" x 4-3/8"
(152mm x 105mm x 111mm)
2.8 lb (1.3kg)