QUATROS QS19324 Owner's Manual

OWNER'SMANUAL
2T FOLDABLE SHOP CRANE
QS19324
DESCRIPTION
2t Foldable Shop Crane QS19324:
SAFETY INSTRUCTIONS
WARNING
- Do not overload. Overloading could result in loss of load and/or personal injury or property damage.
- Always use crane on hard level surface capable of sustaining the load. Never use the hoist on an uneven floor surface as
this could result in the crane tipping over.
- Always lock the legs and jib in position before lifting a load.
- The nuts and bolts supplied with the hoist are all high strength and should not be substituted for inferior types.
- Before each use ensure that all nuts and bolts are correctly fitted and tight.
- Never exceed the safe working loads indicated on the jib.
- Never work directly under a suspended engine.
- Do not drop load suddenly as resulting shock to unit may cause damage.
- Failure to follow these instructions could result in loss of load and/or personal injury or property damage.
OPERATION
WARNING! Ensure that you read, understand and apply the safety instructions.
The warnings, cautions and instructions discussed in this instruction manual cannot cover a possible conditions and situations that
may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product
but must be supplied by the operator.
INSPECTION
- Visual inspection should be made before each use of the engine crane.
- Any engine crane which appears to be damaged in any way is found to be badly worn or operated abnormally must be
removed from service.
- If the engine crane is accidentally subjected to an abnormal load or shock it must be inspected by the manufacturer
immediately.
- It is recommended that an annual inspection of the engine crane be made and that any defective parts, decals or warning
labels be replaced with manufacturer's specified parts.
IMPORTER
Capacity: 2T | Working range: 0 - 2350mm
:
PW TECHSAM Woch Sp. J.
ul. Warszawska 131
20-824 Lublin
www.quatros.eu
a
a
| Weight: 75kg
tel. 81 444-63-73
tel. 81 443-08-12
fax 81 458-38-19
e-mail: techsam@quatros.pl