Fisher & Paykel DE4024P1 Quick Start Manual page 3

Caring for your dryer

Hide thumbs Also See for DE4024P1:

Cleaning the Condenser

If the 'Condenser' indicator light starts to flash this indicates that the condenser

needs to be cleaned. The condenser should be cleaned once a month. The light

illuminates when you first turn the machine on, then turns off once the

been touched.

To Clean the Condenser:

1. Open the condenser cover.

2. Turn the two condenser lock levers 90 degrees then pull out the

condenser.

3. Clean the condenser with pressurized water and wait until the water drains.

4. Replace the condenser.

5. Turn the two condenser lock levers to lock the condenser back in place

again. Make sure that these locks are engaged securely.

6. Close the condenser cover.

https://producthelp.fisherpaykel.com/us/Dry/Dryers/Condensing/DE4024P1/User_Guide_DE4024P1/08_caring_for_your_dryer

• Do not use the water collected in the water tank for drinking or food processing.

• Never run the dryer without the water tank in place.

• If the water tank becomes full, the tumble dryer will pause drying and will sound an alarm.

You must empty the water tank before the dryer can continue drying. Empty the tank,

replace it back in the housing then touch to resume the cycle.

Turning the condenser

locking levers

Pulling out the condenser

Updated: Tue, 16 Nov 2021 12:07:11 GMT