Advertisement
Quick Links
WALK-IN BATHTUB INSTALLATION MANUAL
Walk-in Bathtubs
Manufactured by; Baths of Distinction Inc.
APPROVALS
All non-jetted bathtubs comply and are listed in accordance with
ASME A112.19.1/CSA B45.2
All jetted bathtubs comply with ASME A112.19.7/CSA B45.10 and are listed and
labeled in accordance with UL 1795
UL File Number E334135
MA Code Accepted
P1-0618-475; P3-0216-258; P1-1016-120; P3-0117-370; P1-0617-559;
P1-0616-585; P1-0718-507; P3-0216-258; P1-0616-559
Congratulations on your purchase of a fabulous new walk-in
bathtub from Baths of Distinction Inc.
WARNING
This Instruction and Installation Manual shall be removed only by the final user,
prior to using this unit
1
www.bathsofdistinction.com
Advertisement
Summary of Contents for Baths of Distinction P1-0618-475
- Page 1 WALK-IN BATHTUB INSTALLATION MANUAL Walk-in Bathtubs Manufactured by; Baths of Distinction Inc. APPROVALS All non-jetted bathtubs comply and are listed in accordance with ASME A112.19.1/CSA B45.2 All jetted bathtubs comply with ASME A112.19.7/CSA B45.10 and are listed and labeled in accordance with UL 1795...
-
Page 2: Table Of Contents
WALK-IN BATHTUB INSTALLATION MANUAL TABLE OF CONTENTS 1. Introduction 2. Table of contents 3. Safety 4. Warranty 5. Warranty 6. Access to Pump 7. Installation 8. Operation 9. Electrical 10. General Care www.bathsofdistinction.com... -
Page 3: Safety
WALK-IN BATHTUB INSTALLATION MANUAL SAFETY Important Safety Instructions 1. DANGER: To reduce the risk of injury or drowning, do not permit children to use without adult supervision. 2. DANGER: Do not submerge your head under the water or wash your hair in the bathtub with the jets running. -
Page 4: Warranty
WARRANTY Responsibilities of Others Baths of Distinction Inc. (the “Company”) is not responsible for costs to modify any product to obtain any code approvals such as city, county or state building coded within the USA. The Company extends a non-transferrable* warranty to the original purchaser (the “User”) who purchases the unit for personal or single family residential use as follows;... - Page 5 WALK-IN BATHTUB INSTALLATION MANUAL exclusions may not apply to you. This warranty gives you the specific legal rights. You may also have rights which vary from state to state. Warranty Service As well as its’ own factory trained technical staff. The company maintains a list of independent service personnel to perform required warranty service repairs.
-
Page 6: Access To Pump
WALK-IN BATHTUB INSTALLATION MANUAL ACCESS TO PUMP ETC. AFTER INSTALLATION In accordance with ASME A112.19.7/CSA B45.10 and IPC code paragraph 421.5 ‘Access to Pump’, the following are the manufacturer recommendations for access. The codes state that any access opening must be unobstructed and of a size necessary to permit the removal and replacement of the circulation pump. -
Page 7: Installation
WALK-IN BATHTUB INSTALLATION MANUAL BATHTUB INSTALLATION 1. Your Walk-in bathtub requires 2 x 15 amp GFCI connections that shall be accessible after removing either of the front panels on the bathtub. 2. There are leveling pegs on the base of the tub. 3. - Page 8 WALK-IN BATHTUB INSTALLATION MANUAL Walk-In Tub Control Button Operation Back Air Jets Water Jets Chromo Light Feet Zone Control Back Zone Control allows user to select area of concentration either feet or back. If both are desired, rotate lever between feet and back. Feet Zone Control The Air Blower is One-Speed, On/Off.
- Page 9 WALK-IN BATHTUB INSTALLATION MANUAL ELECTRICAL DIAGRAMS For Hydro-Spa jetted, all options on both air and water are included. Use 2 x 15 amp GFCI outlets www.bathsofdistinction.com...
-
Page 10: General Care
WALK-IN BATHTUB INSTALLATION MANUAL GENERAL CARE AND MAINTENANCE WARNING: In order to preserve the high gloss acrylic finish of your new bathtub, never use abrasive cleaners. Do not use steel wool, acetone, window cleaning products, ammonia, paint thinner or mineral oil on your bathtub or fixtures. Use of Bath Salts Salts like Epsom Salts can be used in the bathtub.