2.3 Printing Paper Specifications
2.3.1 Recommended Paper
Type
Paper width
Paper thickness
Roll diameter
Printed surface
Recommended paper
Core
Caution :
1. Print quality may vary if you use paper other than specified.
2. In such case, change print density by dip switch setting. (See "5 Dip Switch Setting")
3. Do not paste the paper to the core.
4. Chemicals or oil may change the color of paper, or printed characters may be vanished.
5. Change of paper color starts from approx. 70°C. Pay attention to heat, humidity and
CITIZEN
: Thermal paper
: 80 plus 0/minus 1 mm
: 65 ± 5 micro m
: Ø83mm or less
: Outside of the roll (surface)
: TF50KS-E2C by Nippon paper Mil. or other equivalent
: Ø12mm (inner diameter), Ø18mm (outer diameter)
sun light.
17
iDP-3210 User's Manual