Table of Contents
Advertisement
3. Clean the burner with a soft brush or blow clean with compressed air and wipe
with a cloth.
4. Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened
paper clip).
5. Inspect burner for any damage (cracks or holes). If damage is found, replace
with a new burner. Reinstall the burner, check to ensure that the Gas valve
orifices are correctly positioned and secured inside the burner inlet (venturi).
In some cases your barbecue will light-back because of an insect crawling inside the
burner venturi or a spider spinning its web inside the burner. This can be rectified by
using a bottle brush inserted through the burner venturi and pushing it into the
burner over the burner length. If condition persists consult your gas dealer.
Maintenance
Replacing the battery
If the control knobs no longer light up, the batteries need changing.
29
1. Push the respective control knob and turn it to the "OFF" position.
2. Pull off the control knob.
3. Use a Phillips screwdriver to loosen the battery lock.
4. Remove the battery.
5. Replace it with an identical new battery (see "Technical data" section). Make sure
that the polarity is correct.
6. Lock the battery.
7. Push the control knob onto the grill in the "OFF" position.
Cleaning
65
37
Advertisement
Table of Contents
