I One-Touch Ptt Function - Icom IC-207H Instruction Manual

4
BASIC OPERATION
The microphone can select the desired output
power directly.
HIGH
4
Ä
Push [BAND] to select the desired band, if nec-
essary.
Å
Push [➃HIGH] for high output power; [➄MID] for
mid-high output power; [➅LOW] for low output
MID
5
power.
• "MID-LO" output power CANNOT be selected via
these microphone keys, however, the default setting
for [F-1] is output power selection—"MID-LO" output
power CAN be selected using [F-1], in this case.
LOW
• The output power CANNOT be changed via the mi-
6
crophone while transmitting.
23

I One-touch PTT function

The PTT switch can be operated as a one-touch
PTT switch (each push toggles transmit/receive).
PTT-M
3
Using this function, you can transmit without push-
ing and holding the PTT switch.
To prevent accidental, continuous transmissions
with the one-touch PTT function, the transceiver
has a time-out timer. See p. 59 for details.
Ä
Push [FUNC] then [➂PTT-M] to turn the one-touch PTT
function ON.
• The activity indicator lights green.
Å
Push [PTT] to transmit and push again to receive.
• Two beeps sound when transmission is started and a long beep
sounds when returning to receive.
• "$" flashes while transmitting with the one-touch PTT func-
tion.
Ç
Push [FUNC] then [➂PTT-M] to turn the one-touch PTT
function OFF.
• The activity indicator goes out.