IBM WorkPad c3 Handbook page 198

I tried to do a modem
HotSync operation,
but it did not
complete
successfully.
(continued)
Page 190
Check the following on your companion:
Confirm that the telephone cable is
securely attached to your modem.
Make sure the dialing instruction dials
the correct phone number.
If you need to dial an outside line prefix,
make sure you selected the Dial Prefix
option on your companion and entered
the correct code.
If the telephone line you are using has
Call Waiting, make sure you selected the
Disable call waiting option under
Modem Sync Phone Setup on your
companion and entered the correct code.
Make sure the telephone line you are
using is not noisy, which can interrupt
communications.
Check the batteries in your modem and
replace them if necessary.
Frequently Asked Questions