Appendix B. Standards and protocol compliance
IBM is committed to providing products that comply with industry standards and
protocols.
Standards
The 3534 Model F08 is compliant with the following standards:
v
v SCSI Enclosure Services, Rev 8a
v EA/TIA RS-232 Serial Port specification
v Gigabit Interface Converter Definition Document, Sun, and so on
v IEEE 802.3 for Ethernet
Protocol compliance
The 3534 Model F08 complies with the following standards and protocols.
Support for Fibre Channel ports
All ports on the 3534 Model F08 are universal ports and support F_port
(point-to-point), FL_port (loop), and E_port (switch-to-switch) port connections.
Fibre Channel class operation
The 3534 Model F08 supports Fibre Channel Class 2, Class 3, and Class F
operations on all ports.
Auto-configuration
All ports support E_ports to allow for cascading switches to form larger fabrics.
E_ports are auto-configuring. Linking ports from any two switches automatically
configures an E_port connection to form the fabric. The 3534 Model F08 supports a
trunking option that binds up to four ports together as a high-performance trunk
group. In this trunking configuration, interswitch data transfers can occur at an
© Copyright IBM Corp. 2002, 2003
Fibre Channel ANSI Specifications
– FC-PH, version 4.3 (Fibre Channel Physical)
– FC-PH-2, version 7.4 (Fibre Channel Physical, Enhanced) for Multicast and
Broadcast functions
– FC-PH-3, version 9.4
– FC-SW-2, version 4.4 (Fibre Channel Switched Fabric)
– FC-FG Revision 3.5 (Fabric Generic Requirements)
– FC-AL, version 4.5 (Arbitrated Loop)
– FC-AL-2, version 5.7 (Arbitrated Loop Extensions)
– FC-FLA, version 2.7 (Fabric Loop Attach)
– FC-GS-2, version 5.3 (Generic Services)
– FC-GS-3, version 6.42 or later (Generic Services)
– FC-PLDA, version 2.1 (Private Loop Direct Attach)
– FC-Tape Fibre Channel Tape (FC-Tape)
– FCP-2Rev4 (Fibre Channel Protocol)
– FC-FS Revision 0.2 or later
– FC-IP
41