Conserving Supplies; Ordering Supplies - IBM InfoPrint 1622 User Manual

Conserving supplies

Several settings in your application software or on the display let you conserve toner and paper. For more information on
changing these settings, see the Menus and Messages Guide.
Supply Menu selection item
Toner Toner Darkness in the
Defaults
Print media Multipage Print in the
Defaults
Duplex in the Defaults
Finishing Menu
Use your software application
or printer driver to send a
Verify Print job.

Ordering supplies

To order supplies, contact the place where you bought your printer for more information.
Ordering a toner cartridge
When the 88 Toner Low message appears, you should order a new toner cartridge. You can print a few hundred pages
after the 88 Toner Low message appears. You need to have a new cartridge available when the current one no longer
prints satisfactorily.
Maintaining the printer
What the setting does
Lets you adjust the level of toner released on a sheet of print media. The
Quality Menu values range from 1 (lightest setting) to 10 (darkest setting).
Causes the printer to print the two or more page images on one side of a
Finishing Menu sheet. Values for Multipage Print are 2 Up, 3 Up, 4 Up, 6 Up, 9 Up, 12 Up,
and 16 Up. Combined with the duplex setting, Multipage Print lets you print
up to 32 pages on one sheet of paper (16 images on the front and 16 on the
back).
Duplex printing lets you print on both sides of a sheet of paper.
Lets you examine the first copy of a multiple-copy job to be sure it is
satisfactory before you print the other copies. If the job is unsatisfactory,
you can cancel the job.
See Printing and deleting held jobs on page 30 for more information
about a Verify Print job.
Conserving supplies
39