Table of Contents
Advertisement
Chapter 6: System setup
6.1 Installing operating system
The PSG2 series are supplied together with suitable CERTIFICATE OF AUTHENTICITY (COA) related to the operating
system you asked for.
The Certificate of Authenticity is the element ensuring the originality of the operating system.
The identification data concerning the type and serial number (PRODUCT KEY) are shown on the label on the side of
the device.
The product key code printed on the authenticity certificate, must be specified every time you install the software. No
product key is needed for embedded OS and linux.
Warning!
The removal or loss of the authenticity certificate implies the forfeiture of the operating system license contract. Using
the software without regular license is a legal offence.
This motherboard supports Microsoft
distros.
Because motherboard settings and hardware options may vary, use the setup procedures in this chapter for general
reference only. Refer to your OS documentation for additional informations.
6.2 BIOS Setup
The system is delivered with the optimized defaults preconfigured state and is operational.
Changes in the BIOS settings may only be implemented by appropriately trained staff.
6.3 Touchscreen driver and calibration
PSG2 touch screen devices are already calibrated by factory. No calibration is needed.
Windows
operating systems: 10 (32 bit and 64 bit editions), and different Linux
®
®
www.panel.it
24
24
Advertisement
Table of Contents
