Fisher & Paykel WASHSMART WA7060 Series Installation Manual/User Manual page 40

Out of balance recovery routine
When your washer is spinning it can sense if the wash load is out of balance. If an out
of balance load is detected, the washer will stop and re-try spinning one more time. If it
still senses an unbalanced load there are two options the washer can take.
Automatic recovery OFF (the default setting)
Your washer will stop, beep, and show
screen. You must redistribute the load more evenly yourself. Use this option if you wish
to conserve water.
Automatic recovery ON
Your washer will try to automatically correct the out of balance load. It will fill with
water and agitate to redistribute the load before trying to spin up again.
To change the out of balance (OOB) recovery option:
Enter Option Adjustment mode (refer to page 34).
1
Select the 'Heavy' cycle.
2
WashSmart™ Eco washer and WashSmart™ washer: Touch the 'More'
3
turn automatic recovery
QuickSmart™ washer: Touch the 'Water Level' button to turn automatic recovery
or .
WashSmart™ Eco washer and WashSmart™ washer (WashSmart™ Eco washer panel is shown)
Changing the OOB routine
QuickSmart™ washer
Changing the OOB routine
38
CHANGING PRE-SET OPTIONS
or .
OOB
Recovery
OOB
Recovery
in three phases on the display
button to