Setting Power Indicator; Enabling / Disabling Automatic Brightness Adjustment - Eizo FlexScan EV2736WFS3 User Manual

4-2. Setting Power Indicator

This function allows you to set the power indicator (blue) ON / OFF in the monitor ON condition.
Procedure
1. Choose "Monitor Settings" in the Setting menu, and press
2. Choose "Power Indicator" in the "Monitor Settings" menu, and press
The "Power Indicator" menu appears.
3. Select "On" or "Off" with
4. Press to exit.
4-3. Enabling / Disabling Automatic Brightness
Adjustment
The ambient light sensor on the front side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the ambient light sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Press .
2. Choose "Auto EcoView" in the "EcoView Menu" menu, and press
The "Auto EcoView" menu appears.
3. Select "High", "Standard", or "Off" with
4. Press to exit.
Note
• As "Brightness" in the Setting menu is changed, the auto adjustment range for Auto EcoView is also changed.
• Set to "High" if you feel a little brighter with "Standard" setting status.
or .
or .
.
.
.
Chapter4PowerSavingFunctions
27