Functions Of The "Administrator Settings" Menu - Eizo FlexScan EV2785-BK User Manual

4-2. Functions of the "Administrator Settings" Menu

Function
Auto Input Detection
Compatibility Mode
USB-C
DisplayPort
26
Chapter 4 Administrator Settings
Setting
Range
On This function automatically recognizes the connector through which
Off PC signals are input, and displays images on the screen accordingly.
• "On"
When the monitor is connected to multiple PCs, if a specific PC
enters power saving mode or no signals are input to the monitor,
the connector is automatically changed to another one to which
signals are input.
• "Off"
This function displays the signal from the selected connector
regardless of whether a signal is input or not. In this case, you
can select the input signal to display using the
switch on the front of the monitor. For details, see
Input Signals" (page
Note
• This function is not available during PbyP display.
• This product automatically recognizes the connector through
which PC signals are input, and displays images on the screen
accordingly regardless of whether this function is set to On or Off
just after the main power switch on the rear side of the monitor
has been turned on.
• When this function is set to "On", the monitor only enters the
power saving mode when signals are not input from any PC.
On If you want to avoid the following phenomena, set this function to
Off "On".
• The positions of windows and icons are shifted when the monitor
is turned off / on or has returned from the power saving mode.
• Power Save function of the PC does not work normally.
• During USB-C input, the screen blinks two or three times
immediately after the USB cable has been connected or the PC
has returned from the Power Save mode.
• When the power to the monitor is turned off, a device connected
to the USB downstream port does not work.
• When the monitor is turned off, a device connected via a USB-C
connector cannot be recharged.
4K UHD 60Hz / The USB setting and the types of signals that the monitor can display
USB2.0 can be changed.
4K UHD 30Hz /
USB3.1
Version 1.1 The types of signals that the monitor can display can be changed.
Version 1.2
Description
13).
operation
"2-2. Switching