Settings Session - I-Tech RKP115-1602 User Manual

RKP115 / RKP117 / RKP119
Rev. : 1.0
12. Start Up
KVM Settings Session
1. OSD
OSD Menu on screen time
●
default is 10 seconds.
It can be modified from 05 – 99
●
seconds.
2. Scan
Scan interval from one PC port
●
to next PC port when applying
auto scan, its default is 10
seconds.
It can be modified to 99
●
seconds for maximum.
3. Change Password
Default password "00000000"
●
8 zeros
Choose "Change Password" in
●
KVM Setting Session.
Key-in the existing password.
●
Enter the New Password.
●
Re-Enter the New Password.
●
Changing Password complete.
●
The steps are shown as next
●
picture:
4. Console On/OFF
ON – any user can use the
●
console
OFF – user is not allowed to
●
use the console port, unless
password is entered.
Default – OFF, you need to
●
key-in password.
5. Escape
When the following screen is
●
appeared, you can press
"ESC" key to escape.
ENTER PASSWORD :
ESC : QUIT
ENTER NEW PASSWORD :
ESC : QUIT ENTER :
RETYPE NEW PASSWORD :
ESC : QUIT ENTER :
COMPLETE
NEW PASSWORD COMPLETE
ESC : QUIT ENTER :
COMPLETE
102
P.25
█
ENTER :
COMPLETE
?SYSTEM 02
User Manual
█
█