Table of Contents
Advertisement
Quick Links
Gas Countertop Griddle
This manual contains important information regarding
your purchased equipment. Please read the manual thoroughly
prior to equipment set-up, operation and maintenance.
Failure to comply with regular maintenance guidelines
outlined in this manual may void the warranty. Please keep it for
future reference after installation and do not throw it away!
This is a universal installation and operation instruction book
which would apply to different models.
PLEASE READ!!!
JMC Inc.
225 Water St Suite A226
WARNINGS
• Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or
any other equipment.
• Improper installation, adjustment, alteration, service or maintenance can cause property
damage, injury or death.
• Read the installation and maintenance instructions thoroughly before installing or
servicing this equipment.
• Have the equipment installed by a qualified installer in accordance with all federal, state
and local codes.
• Do not install or use without all 4 legs.
• This equipment is for use in non-combustible locations only.
• Do not obstruct the flow of combustion and ventilation air.
• Do not spray controls or the outside of the equipment with liquids or cleaning agents
• Allow for hot parts to cool before cleaning or moving.
• This equipment should only be used in a flat, level position.
Advertisement
Table of Contents
Summary of Contents for Copper Beech CBMG-12G
- Page 1 Gas Countertop Griddle This manual contains important information regarding your purchased equipment. Please read the manual thoroughly prior to equipment set-up, operation and maintenance. Failure to comply with regular maintenance guidelines outlined in this manual may void the warranty. Please keep it for future reference after installation and do not throw it away! This is a universal installation and operation instruction book which would apply to different models.
-
Page 2: Installation
• Do not operate unattended. • Any loose dirt or metal particles that are allowed to enter the gas lines on this equipment will damage the valve and affect its operation. • If you smell gas, follow the instructions provided by the gas supplier. Do not touch any electrical switch;... -
Page 3: Propane Gas Conversion
withstand a maximum pressure of ½ PSI (14” WC). If the line pressure is beyond this limit, a step down regulator before the regulator provided will be required. The arrow above(FLOW) shows gas flow direction and should point downstream to the equipment. PROPANE GAS CONVERSION This griddle is shipped from the factory equipped with fixed burner orifices for natural gas operation. -
Page 4: Operation
OPERATION: Before initial use, turn the gas control knob to the maximum setting and allow the equipment to burn-in for 20 minutes. Seeing smoke coming from the cooking surface is normal during burn-in. After 20 minutes of burn-in, equipment is ready for use. 1. -
Page 5: Cleaning The Griddle
product results. The griddle plate is steel, but the surface is relatively soft and can be scored or dented by careless use of a spatula or scraper. Be careful not to dent, scratch, or gouge the plate surface. Do not try to knock off loose food that may be on the spatula by tapping the corner or the edge of the spatula on the griddle surface. - Page 6 Product Specification Sheet MANIFOLD Total B.T.U. MODEL STYLE(Manual) GAS TYPE PRESSURE per Hour Single Burner Natural Gas 4.0" W.C. CBMG-12G 30,000 Propane Gas 10.0" W.C. 2 Burners w/ Natural Gas 4.0" W.C. CBMG-24G individual 60,000 Propane Gas 10.0"...
- Page 7 4 Burners w/ Natural Gas 4.0" W.C. CBMG-48G individual 120,000 Propane Gas 10.0" W.C. control 5 Burners w/ Natural Gas 4.0" W.C. CBMG-60G 150,000 individual Propane Gas 10.0" W.C. control MANIFOLD Total B.T.U. STYLE(Thermost MODEL GAS TYPE atic) PRESSURE per Hour...
- Page 8 Descripti CBMG-12 CBMG-24 CBMG-36 CBMG-48 CBMG-60 Griddle 2012908 2012908 2012908 2012909 2012909 plate 7001 8001 9001 0001 1001 3011102 3011102 3011102 3011102 3011102 knob 2012908 2012908 2012908 2012908 2012908 oil pan 7008 7008 7008 7008 7008 3021300 3021300 3021300 3021300 3021300 pilot 3022200...
- Page 9 Descripti CBTG-12 CBTG-24 CBTG-36 CBTG-48 CBTG-60 Griddle 2012908 2012908 2012908 2012909 2012909 plate 7001 8001 9001 0001 1001 3011102 3011102 3011102 3011102 3011102 knob 2012908 2012908 2012908 2012908 2012908 oil pan 7008 7008 7008 7008 7008 3021300 3021300 3021300 3021300 3021300 pilot 3022200...