Re-Installing Drawers - Fisher & Paykel DCS ADR2-36 Installation Instructions And User Manual

INSTALLATION

RE-INSTALLING DRAWERS

1. Re-install the drawers by extending their guides as shown in Fig. 10.
2. While holding the drawer parallel to the cabinet, carefully align & engage the ends of the glides.
Slide the drawer in about an inch so that the glides are supporting the back of the drawer (Fig. 11).
3. While holding the drawer up by the handle, pull the glides from the drawer cavity out over the
drawer glide until they click (Fig. 12).
4. As you push the drawers in, you will encounter moderate resistance. Continue to push the drawer all the way in to complete
the engagement process. The drawer will now glide smoothly in & out with light effort (Fig. 13).
Fig. 10
Drawer Cavity
Glide
Fig. 12
11
Drawer Glide properly
Engaged.
Slider latch
Fig. 11
Fig. 13