Page 11
Contents Ⅰ. Gimbal Light Series Introduction Ⅱ.Disclaimers And Warnings Ⅲ. The Introduction Of GL60 Ⅳ. The Gimbal Light Software Tutorial Ⅴ.The Firmware Update...
Ⅰ. Gimbal Light Series Introduction This series of products can be used for UAV, film and television shooting, night patrol search light, Power line inspection, emergency lighting, etc. Through the DJI SKYPORT V2.0 interface, this product can be directly mounted on DJI M300 RTK/M210 V2 for use.
Ⅲ. The Introduction Of GL60 GL60 only weighs 495 grams and has a rated power of up to 65W. Through an optical imaging structure composed of five lenses, it emits a sharp light column with only 12 degrees of Angle, with an effective irradiation distance of up to 200 meters. Its brightness uniformity and color uniformity are extremely high, providing unprecedented aerial lighting for unmanned aerial vehicles operating at night.
Ⅳ. The Gimbal Light Software Tutorial 1. Click DJI Pilot to enter the main interface. 2. Enter the main interface and the word Gimbal SearchLight 60 is displayed in the lower left corner, indicating that the LOAD identification of GL60 is successful.
Page 17
3. Enter the main interface and then click the Multi-Gimbal Connection button, and then select the GimbalⅠand GimbalⅡ, achieve the result of two Gimbals synchronization. the Multi-Gimbal Connection button 4. Click the menu bar and click the third-party load option to enter the GL60 operation interface.
Page 18
5. Click the button to display real-time data, and a status display box will pop up in the upper left corner of the main interface to observe real-time temperature, power and other parameter states of GL60. 6. Click the switch button to control the on-off state of the light; Click the Twinkle button to turn on the flash mode.
Page 19
7.When H20 and GL60 are used simultaneously, the Pitch adjustment button Roll adjustment button and Yaw adjustment button can be used to keep the spot in the center of the screen. Click the save fine adjustment button after a single fine adjustment.Each time the maximum fine adjustment range is ±5°.
Ⅴ.The Firmware Update For firmware update of GL60 UAV Gimbal Light or download the latest version please pay attention to www.gzczzn.com. If the Light cannot work properly due to the firmware update of UAV please contact the local agent or manufacturer in time. If you have any questions or suggestions on the manual, please contact us through the following email::service@gzczzn.com...