Table of Contents
Advertisement
12. Unplug the Charger from the electrical socket/plug.
13. Allow battery to stand for 30 minutes before using it.
14. Unplug the battery from the charger.
15. When ready for use, install the battery and making
sure to insert it the right way round. (See Fig.11)
16. Make sure the seal and sealing surfaces are clean and
lubricated with silicone grease EVERYTIME (you can
buy this at your local hardware store) before replacing
the Battery Door (See Fig.12).
Sealing surfaces
13
Fig.11
Silicone
Grease
Seal
Fig.12
17. Replace the Battery Door and turn the Battery Door Screw
making sure it is tightened completely (See Fig.13).
Replacing a flat battery with a fully charged battery.
1. Follow the steps 1 to 8 above.
2. Remove the flat battery.
3. Install and connect the charged battery.
4. Follow steps 16 to 17.
Buying Rechargeable Batteries
It is a good idea to have a second battery so that when
one has run out you can swap it over with a charged one.
Contact your local customer service center/distributor to
purchase additional rechargeable batteries.
Battery & Charger Ratings
Rechargeable battery: 12V / 2.8Ah
Charger: Output-12V / 500mA
14
Fig.13
Advertisement
Table of Contents
