Yamaha DTX-PRO Reference Manual page 60

MENU Button
Screen Parameter Description
3.
Start editing.
DELETE
NAME
 Editing wave banks
If the cursor is on the wave bank number, press "BANK" ([F1]) multiple
times to move to the user voice number.
User voices that do not have any imported any audio files cannot be
edited.
1.
Use the [–][+] controllers to select the user voice you want
to edit.
2.
Press the "BANK" button ([F1]) to choose a wave bank.
You can audition sounds when a wave bank with banks is selected.
3.
Press the "FUNC"
ing you want to perform.
IMPORT
DELETE
LO/HI
SPLIT
NAME
4.
Press the [F3] button.
You can audition a sound by using "
When the confirmation screen appears, press the "YES"
button ([F1]).
Press the "NO" button ([F3]) to cancel changes.
Use the [–][+] controllers to select a character, and then
use the " " and " " buttons ([F1] and [F3]) to move
the cursor to the next character position. A user voice
name of up to 16 characters can be assigned.
When you are finished entering all characters, press the
"OK" button ([F2]).
button ([F2]) to choose the type of edit-
Audition sounds
Add
Delete
Specify the upper and lower end of the velocity range for
each wave
Automatically split the wave velocity range according to
the number of waves assigned to the voice.
When there are waves on multiple wave banks, use this
setting to split the velocity range into equal sizes accord-
ing to the number of waves, and assign a wave to each
range starting from the lowest number.
Save under a new name
" (Audition).
DTX-PRO Reference Manual 60