Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for TAXON TOOLS Scart Switch
-
Page 2: Table Of Contents
Manual Taxon Scart Switch Inhalt Inhalt .................................. 2 1) Overview................................ 3 2) First steps ..............................4 2.1) Adapt Power Supply ..........................4 2.2) Connect devices............................4 2.2.1) Connect device with RCA connection....................5 2.2.2) Connect Sony PVM monitors ......................5 2.3) Daisy Chaining ............................ -
Page 3: Overview
You can select the desired input here. The letter “A” stands for automatic mode. At this position, the Taxon Scart Switch automatically switches to the most prioritized input device. If you select another position, the corresponding input is switched to the output. If no device is connected to the selected input, no signal will... -
Page 4: First Steps
Insert the desired country-specific plug and turn it counterclockwise until it clicks into place. 2.2) Connect devices Connect the game consoles or other video equipment to the Taxon Scart Switch. If a device should have a higher priority, it should be connected to inputs with higher numbers. -
Page 5: 1) Connect Device With Rca Connection
2.2.1) Connect device with RCA connection If you want to connect devices with RCA connectors, use either the Taxon Tools adapter or an equivalent adapter to convert RCA to Scart. Connect the corresponding color of the RCA cable to the same color of the adapter. -
Page 6: Daisy Chaining
2.3) Daisy Chaining For Daisy Chaining you need at least 2 Taxon Scart Switches. Connect the Scart output of the first taxon Scart Switch to input 1 of the second Taxon Scart Switch. Afterwards you can connect further input devices. -
Page 7: Troubleshooting
I loop HD signals through the Taxon Scart Switch using an adapter and the quality is poor. This problem cannot be solved with the current version of the Taxon Scart Switch. Use of HD signal sources are not recommended with the device. - Page 8 After that, you can still decide if you want to repair the device or not. If you don’t want to repair the device, it can be sent back unrepaired. Postage has to be payed by the customer. If you don’t want to pay the postage, the device becomes the property of Taxon Tools KLG.
-
Page 9: Technical Data
4) Technical Data Inputs / Outputs 8 Scart inputs (RGB capable) 1 Scart output (RGB capable) 1 6-pin RCA output (RGBS signals / Audio-LR) Automatic switching The switch detects a video signal on pin 20. If pin 20 is not connected at the input device, this input must be selected manually.