Yamaha Harmony Director HD-300 Owner's Manual page 27

Deleting the Most Recent Recording Results
You can delete an unwanted recording result immediately after the
recording stops. Use the [-]/[+] buttons to select the file, and then press the
[DELETE] button
. Follow the confirmation prompt that appears to
either cancel or delete the recording result.
NOTE
• If the cursor has moved away from the recording number, you can move the cursor
back to the file name with the [R/J] button.
• If the recording number has disappeared due to transitioning between screens or
turning the power off and on, the recording result files are treated as past recorded
data and can no longer be deleted on the instrument itself. Past files can be
deleted on a computer or other devices that allows access to the USB flash drive.
Recording a Particular Section (Time Shift Recording)
You can capture an "unrecorded" part with the Time Shift Recording function; in other words, the instrument has the
capability of recording your performance, including even up to 10 seconds before you press the [REC] button.
 Example of Time Shift Recording
You want to record
this section
[TIME SHIFT
RECORDING]
on [REC]
TSR_01.wav
Pre
3 sec
Start performance
 How to use Time Shift Recording
1.
Press the [TIME SHIFT RECORDING] button to put the
HD-300 into Time Shift Recording standby mode.
A "Ready" message will appear on the screen.
2.
Start performing.
3.
When you feel like you want to record the section during a
performance, press the [REC] button.
This will start recording at the specified number of seconds (3 – 10
seconds) before the [REC] button is pressed.
4.
To extend the recording time, press the [REC] button again.
5.
Without further operation for the specified number of seconds (5 – 20 sec) after the [REC] button is
pressed, the recording will automatically stop.
You can also stop the recording immediately by pressing the [R/J] button, without waiting for the recording time
to run out.
NOTE
• You can change the length of the following times on the Settings screen.
"Pre Time Shift Rec": number of seconds recorded before the [REC] button is pressed in step 3
"Post Time Shift Rec": number of seconds until the recording ends automatically in step 5
For details, refer to page 31.
• The operation for playing back the result of Time Shift Recording is the same as for regular recording. For details, see the "Playing
Back the Most Recent Recordings" (page 26).
You want to record
this section
[REC]
Pre
Post
3 sec
10 sec
Sharing Performances (Recording/Playback)
You want to record
a little longer
(Extended recording)
[REC]
TSR_02.wav
Post
Post
10 sec
10 sec
End of performance
Time
27
HD-300 Owner's Manual