Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Nebia Spa Shower 2.0
- Page 1 Setup Guide How to install your Nebia Spa Shower 2.0...
- Page 2 Meet your Nebia Spa Shower 2.0 Head swivel The Nebia Spa Shower 2.0 has been designed for the highest standards of experience, design, and water efficiency. Our H Micro™ technology atomizes water into millions of droplets, delivering 10 times more surface area of water, Sliding arm all while saving up to 65% of water compared to a standard shower.
-
Page 3: Compatibility Requirements
Compatibility requirements Before you get started " Min 4 To install the Nebia Spa Shower 2.0, you need: We know that installing a shower may seem intimidating. Don’t worry. " Min 5 Water heater temperature: The Nebia Spa Shower 2.0 was designed "... -
Page 4: Setup Time
Visit nebia.com/install for videos and tips Setup time Setup preparation Before installing your Nebia Spa Shower Tools you may need to uninstall PREPARATION INSTALLATION DRYING TIME 5 minutes 25 minutes At least 8 hours 2.0, you will need to uninstall your... -
Page 5: What Comes In The Box
SCREWS Please note that you will not use all of these parts to install your Nebia Spa Shower 2.0. We do recommend that you keep all of the parts in order to install Nebia 2.0 in a different location in the future. - Page 6 Visit nebia.com/install for videos and tips Head, bracket & arm, Rest shower bracket & arm Position shower head Mount the head screws, L-key, arm cover Rest the bracket & arm upright so that the Position the shower head on the arm Fasten all four screws in position and bottom makes contact with a flat surface.
- Page 7 Attach hose Attach arm cover Attach end of the bracket & arm hose Snap arm cover in place. Ensure the hose to the wye making sure it goes in all exits the rear of the arm cover through the the way. Water will gush out from this notch.
- Page 8 If you have a ledge The key provided in your install kit will help you determine the correct The letter that aligns with the ledge adapter and collar combination for installing Nebia in your shower (not the wall) will indicate the correct setup.
- Page 9 Screw the end of the adapter wrapped the adapter for damage. Contact Nebia in plumber’s tape into the water outlet. Screw the collar onto the adapter by Slide the spacer(s) you selected over...
- Page 10 Make sure the arm may slide up the bracket when the tape is removed. red, Nebia is not properly secured and you should keep bracket is completely vertical and apply pressure at the pushing the bracket into the collar until the indicator lower end of the bracket for 20 seconds to secure the Attach the filter to the inlet.
- Page 11 Alternatively, you can install the wand without the dock (go straight to step 16) and minute before continuing. For dirtier the on/off button facing you. install the dock in your desired location after your first Nebia shower. surfaces, we recommend using a Congratulations, you are all set! scouring pad or sponge (i.e.
- Page 12 Nebia Spa Shower 2.0 soaking in a Insert the key into the slot at the top take anywhere between 20 minutes to 2 cleaning solution for more than 2 hours.
-
Page 13: Limited Warranty
ASME How do I submit a warranty claim? or replacement of your Nebia Spa Shower 2.0; or (d) you a refund of the purchase price and applicable A112.18.1 Clause 5.4.2.3.2, is 5.3 L/min (1.4 gpm).