Table of Contents
Advertisement
User Manual
13
LIOSMART 100
4.0
USE PURPOSE AND
SAFETY ELEMENTS
This freeze dryer is designed and build for many pilot and research or even small production
purposes.
Given the wide scope of specification, appliance is useful in many areas as, pharmacy, food
industry, biotechnology, ...
It is not allowed to heat-up any material which could form explosive atmosphere.
Do not store any fluids on top of the housing!
The appliance may only be used in rooms where the possibility of explosive atmosphere is not
present!
Operating the unite with open doors can cause different errors or even break down.
Microprocessor controller has a special safety system which turns heaters off if temperature rises
for more than 5 °C above set temperature.
In case of an error on this system, a mechanical over temperature shut-off will disable heating. If
this happens the cause must be found and the over temperature shut-off must be manually reset.
The over temperature shut-off device is located behind the rear plate of the housing and is
manually reset by pressing the spring next to the thermostat setting shaft.
The appliance may only be used by trained personnel with enough practical experience regarding
heating, cooling and conditioning.
Each user is responsible for correct and safe use.
The device does not cause noise greater than 75 dB (excluding vacuum pump).
When indicating error, press "START/STOP" and switch the main switch in the off position
immediately. Contact service
Advertisement
Table of Contents
