Advertisement
Quick Links
Advertisement
Related Manuals for ALDI KAWWASHTL7A
Summary of Contents for ALDI KAWWASHTL7A
- Page 1 7KG TOP LOAD WASHING MACHINE KAWWASHTL7A & KAWWASHTL7B...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read Carefully and Keep for Future Reference Read this user guide thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed reduce the risk of fire, electric shock and injury when correctly adhered to. - Page 4 Installation • Install the washing machine on a flat surface to avoid overturning during use. If the machine must be placed on carpet, make sure any ventilation openings in the base are not obstructed. • Install the washing machine so that there is a distance of at least 200mm between the appliance enclosure and any external heat sources, such as appliances containing heating elements.
- Page 5 Cleaning and maintenance • Before cleaning or performing maintenance, always unplug the appliance from the power supply. • Except for the filters that require regular cleaning, the unit has no user-serviceable parts contained within. Do not attempt to repair, disassemble or modify it. Repairs made by inexperienced or unqualified persons may cause injury and/or make more serious repairs to the appliance necessary.
- Page 6 OVERVIEW Front Rear Accessories Description Description Wash/spin tub Control panel Water supply hose connections Housing Drain pump filter Detergent box Drain hose connection Lint filter Adjustable leg (1) Accessories Description Hot water supply hose Cold water supply hose Drain hose with elbow Documentation (not shown) User guide...
-
Page 7: Installation
INSTALLATION Unpacking • This product has been packaged to protect it against transportation damage. Keep the original packaging carton in a safe place. It will help prevent any damage if the product needs to be transported in the future. If it is to be disposed of, please recycle it and all other packaging materials where possible. - Page 8 Levelling the washer • Install the washer on a stable and level surface, in a dry location, out of sunlight. • If levelling is necessary, adjust the adjustable leg (at the front right side of the machine), as illustrated, below. The maximum permissible inclination of the supporting surface is 2 degrees.
- Page 9 • Attach the curved end of the hose to the corresponding inlet valve of the washer. • Tighten the coupling nuts securely by hand, as illustrated below. • Tighten the nut by turning it clockwise while holding the hose. (To detach the water supply hose, turn the nut anticlockwise after turning the tap off.) Water inlet valve •...
- Page 10 Installing the drain hose • The drain hose and drain pump filter are located at the rear of the machine. • Pinching the two bands of the clamp on the drain hose, connect it to the drain hose connection at the back of the washer. •...
- Page 11 • When the washer is in use, put the drain hose into a drain spout (or into a sink/tub), as illustrated below. CAUTION: • While the washer is in use, ensure the height of the drain hose is at least 70cm, otherwise the washer will not work properly or the water may flow out in the course of washing.
-
Page 12: Operation
OPERATION Control Panel 1. Display: The display shows the currently selected option. For example: Status Display Result During washing, it shows the time Remaining time is 20 minutes remaining When setting soak and wash processes, this indicator shows the time Washing time is 10 minutes you set When setting the preset timer, it shows... - Page 13 3. Start/Pause button • Press this button to start operation. • During operation, press this button to stop the washer temporarily, press it again to restart it. • You can also use this button to cancel the end buzzer, press and hold it for 4 seconds until a beep has acknowledged the command.
- Page 14 Before you start washing • Ensure the washer is stable and level. The inbuilt levelling indicator will help you determine whether levelling is necessary. If so, adjust the adjustable leg (front right) to stabilise the washer. • Ensure the water inlet hoses are properly installed. •...
- Page 15 Default settings for wash processes Program Suitable items Wash time * Spin time Rinse type (minutes) (minutes) Normally soiled cotton Soak: 20 Cotton ** 4x Shower rinse clothing/items Wash: 15 Lightly soiled clothing 2x Water saver Normal 5-12*** and other items rinse (20L-60L***) Heavy Heavily soiled cotton...
- Page 16 Detergent and load recommendations • We suggest you use detergent in the following amounts recommended below. Too little will give poor washing results, but too much will affect rinse performance and may cause overflow of suds, which could interfere with machine operation. CAUTION: Do not overfill detergent.
- Page 17 Customising a program This washing machine is equipped with a fuzzy logic function that automatically chooses certain wash cycle processes for the NORMAL and HEAVY-DUTY programs. You do not have to adjust anything, however, if you want to adjust these values yourself, proceed as follows: Prepare your washing according to points 1 to 4 as mentioned in Normal Usage.
- Page 18 Blanket program Use this program for washing blankets or other bulky items. It will automatically select the highest water level (60L), but you can adjust this manually down to 42L according to the size of your bulky item(s). Press the Power ON/OFF button and open the washer lid. Press the Program button repeatedly until the indicator for the BLANKET program flashes.
- Page 19 Preset timer (delayed washing) This washing machine has a 0-24 hour preset function, which you can set to determine the time when the washing program will finish. (It is, in effect, similar to a ‘delayed start’ function, but you set the time period after which you want the wash to finish rather than to start.) Note: This function is not available for the COTTON, DELICATE and QUICK programs.
- Page 20 Adding detergent to a preset wash When using the delayed wash, do not add detergent directly to the wash tub. • Powder detergent: either put powder detergent into the detergent box or, if you prefer to put it directly into the wash tub, wrap the powder in a small cloth. •...
- Page 21 Setting the water level and other processes You can set the water level for wash and rinse processes. For example, if you are sensitive to detergent residues in your washing, you may want to select a higher water level for rinsing. To set different water levels: Press the Process button until the WASH light flashes;...
- Page 22 Memory function When you run the NORMAL, COTTON or HEAVY-DUTY program, the machine memorises your settings for the next time you select it. Note: This function is not available for the Quick, Blanket and Delicate programs. Child lock With the child lock activated, the machine will stop working automatically and sound an alarm if the washer lid is opened for 4 seconds.
-
Page 23: Troubleshooting
TROUBLESHOOTING Not all unusual incidents you may encounter with your washing machine are faults or cause for concern. Check in the list below what issues may arise and why. Also check in the table on the following page for solutions to other common problems. The washer does not work at all. - Page 24 Error messages: When the following problems occur, the microcomputer inside the washer will detect the abnormal condition. An electronic buzzer will sound for approximately 10 seconds, an error message will flash, as shown below and the washer will stop operating. Type of problem Error message Where to check...
-
Page 25: Cleaning And Care
CLEANING & CARE To prolong the service life of the washing machine, keep it in good condition and perform regular maintenance. For any type of cleaning and maintenance, ensure the washing machine is disconnected from the mains power supply. Cleaning the washing machine (when required): •... - Page 26 Cleaning the water inlet valve (suggested interval: every 6 months) To avoid blockage of the mesh filter at the water inlet after long time use, detach the water inlet hose, making sure you have turned off the water supply at the taps beforehand. Take the mesh filter out of the water inlet valve and clean the filter with a soft brush.
- Page 27 Drain pump maintenance We recommend that you clean the drain pump filter regularly (at least once a month) to avoid blockages created by bobby pins, coins and excess lint. Proceed as follows: • Disconnect the washer from the power source. •...
-
Page 28: Specifications
SPECIFICATIONS Dimensions 54cm (W) x56.2cm (D) x93cm (H) Capacity (max. weight of dry wash load) Weight 34kg Water quantity (High) 55 litres Power source 230-240V-, 50Hz Power consumption 400W Required water pressure 0.03MPa – 0.8Mpa Liquid ingress protection IPX4 Required tap size 20mm... - Page 29 NOTES...
- Page 32 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...