5 Operation
5.1 Operation range
5.2 When to use which feature
FTXP-N
Daikin room air conditioner
4P513685-11H – 2022.06
INFORMATION
The indoor unit is delivered with the wireless remote control as the user interface.
This manual describes only operation with this user interface. If another user
interface is connected, refer to the operation manual of the connected user
interface.
Use the system in the following temperature and humidity ranges for safe and
effective operation.
Operation mode
(a)(b)
Cooling
(a)
Heating
(a)
Drying
(a)
A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b)
Condensation and water dripping might occur if the unit runs outside its operation range.
You can use the following table to determine which features to use:
Feature
Basic features
Operation modes and
temperature
+
Airflow direction
Airflow rate
Operation range
▪
Outdoor temperature: –10~48°C DB
▪
Indoor temperature: 18~32°C DB
▪
Indoor humidity: ≤80%
▪
Outdoor temperature: –15~24°C DB
▪
Indoor temperature: 10~30°C DB
▪
Outdoor temperature: –10~48°C DB
▪
Indoor temperature: 18~32°C DB
▪
Indoor humidity: ≤80%
To start/stop the system and to set the
temperature:
▪
Heat up or cool down a room.
▪
Blow air in a room without heating or cooling.
▪
Decrease the humidity in a room.
▪
In Automatic mode, automatically select an
appropriate
temperature
mode.
To adjust the airflow direction (swing or fixed
position).
To adjust the amount of air blown into the
room.
To run more quietly.
5
Operation
|
Tasks
and
operation
User reference guide
17