Panasonic PAN9026 Quick Start Manual page 19


PAN9026 Wi-Fi/Bluetooth Module
3. Press on the entry to connect to the PAN9026 (1).
Usually the PAN9026 will show up as OpenSynergy A2DP Application.
➔ The connection will be established and is shown as Connected (1). This takes
approximately a couple of seconds.
➔ Now any audio that is played back on the Android device, will be routed to the
PAN9026 instead and output on the audio jack of the PAN9026-IMX.
To verify the correct operation, start an application that will output sound, for
example, an audio player, a video stream, a web radio, or video from the
internet.
➔
If the Android device is still connected to the access point of the PAN9026,
make sure that the PAN9026 itself is connected to an access point with
internet access; otherwise no playback from the internet is possible.
Quick Start Guide Rev. 1.2
The sound will be outputted, when some headphones to the green audio
jack of the Wandboard are connected.
4 Basic Usage
Page 19 of 34