Advertisement
Quick Links
• Make sure your fryer has fully cooled to avoid burns.
• Some components may have sharp edges. Use caution to avoid injury.
Some models have an access panel that makes valve removal unnecessary.
Remove the access panel above the valve and go to step 5.
1
Tools Needed: 10mm Allen Wrench, Crescent
Wrench, and Phillips Head Screw Driver.
Control Panel Instruction Sheet
Control Panel GF34G1M
CAUTION
2
For valve removal, use 10mm Allen Wrench on the
inside of the pot.
Manual Code: 9802190009 210510-GH
Advertisement
Summary of Contents for Masterbuilt GF34G1M
- Page 1 Control Panel Instruction Sheet Control Panel GF34G1M CAUTION • Make sure your fryer has fully cooled to avoid burns. • Some components may have sharp edges. Use caution to avoid injury. Some models have an access panel that makes valve removal unnecessary.
- Page 2 For spicket removal, use Cresent Wrench on the Remove the valve. outside of valve. Remove eight (8) Screws from the oil pot. Remove oil capillary. Remove oil capillary from the pot. Remove the pot.
- Page 3 Turn the fryer body upside down. Remove the four (4) Screws holding the bracket. Remove four (4) Screws from control panel and Unplug the wire from the ignitor. remove the component. INSTALLATION: • Follow steps in reverse order 12-2. • Replace the control panel with (4) Screws (see step 12). •...
- Page 4 Rest assured, we’re here to help. Rassurez-vous, nous sommes là pour vous aider. Tenga la seguridad de que estamos aquí para ayudarle. Customer Service Service à la clientèle Servicio de atención al cliente masterbuilt.com/contact-us masterbuilt.com/warranty masterbuilt.com/collections/parts @masterbuilt masterbuilt.com...