Page 1
HDMI Single Cable CAT5E Extender HDMIEXTV2 Quick Start Guide Please read these instructions carefully before operating the unit and keep for further reference. All the examples and pictures used here are for reference only. The contents of this manual are subject...
Quick Start Guide HDMI Single Cable CAT5E Extender The Genie HDMIEXTV2 is a HDMI extender that uses an Ethernet cable to extend HDMI signal with transmission distance up to 70 meters and resolution up to 1080p. The RX unit has a built-in HDMI connector that allows the receiver to directly connect to an HDMI display without any external power required.
RX Unit Monitor LED Indication Green: Power on/off Yellow: Reserve Transmission Chart The transmission distance will be affected by DVR/NVR or cable quality. HDMIEXTV2 TX to HDMIEXTV2 RX Resolution Distance based on based on CAT5eCAT5e 1920x1200 1920x1080 1280x1024 1280x 720...
Page 4
3. The wiring must be straight through, do not circle the cable to avoid crosstalk interference. 4. HDCP is not supported. 5. HDMIEXTV2 isn’t a networking product, thus please do not connect with any Ethernet device to avoid any damage.