Advertisement
4. Remove the retaining bolts and the right and
left-hand engine side guards.
5. Place a container for the coolant under the
sleeve, 1.
6. Detach the sleeve, 1, on the lower pipe and drain
off the coolant.
7. Detach the sleeve, 1, on the radiator upper
piping.
8. Remove the retaining bolts and the radiator
upper support, 2.
9. Remove the piping, 1, and the sleeve, 2, located
on the lower part of the tank.
SECTION 10 - - ENGINE - - CHAPTER 1
10-36
9
10
11
Advertisement
